Browsing Master of Engineering major in Civil Engineering by Title
Now showing items 1-20 of 37
-
Analysis of traffic condition and management in Pulantubig: A basis for improving traffic management in Dumaguete City
(2007)Roads are very important in our daily lives. They are major channels of transportation. As such, when such roads threaten the safety of motorists and pedestrians, they become the main concern of road users. This is the ... -
Assessment of the existing wastewater treatment system and proposed design of new plant bed wastewater treatment system of Central Philippine University
(2014)This study entitled “Assessment of the Existing Wastewater Treatment System and Proposed Design of New Plant Bed Wastewater Treatment of Central Philippine University” was conducted to determine the efficiency of the ... -
Assessment on the suitability of limestone as alternative component to washed sand in Portland cement concrete pavement
(2001)INTRODUCTION In view of the rapid and accelerated development in infrastructure projects like roads, bridges, buildings, ports and waterworks, the adequacy of aggregates as construction materials is a great problem and ... -
A comparative analysis of strength and cost of precast ferrocement reinforced concrete slab and conventional reinforced concrete slab
(2001)Reinforced concrete is the most common and very popular construction material being used in the Philippines. The ingredients of reinforced concrete - cement, aggregates, water and other admixtures are sourced locally and ... -
A comparative study between liquid soil stabilizer and needle punched non-woven geo textile on compaction and bearing capacity of base course aggregates of wind farm roads in Barangay Unidos, Nabas, Aklan
(2015)Road conditions are affected by several factors such as pavement design, traffic loads and soil conditions supporting the road. At times, pavement design and traffic loads are the direct considerations but problems occur ... -
A comparative study of the results of computer softwares and slope deflection method for structural analysis of frame
(1996)This study aims to compare the result of the computer programs and slope deflection method for the structural analysis of frame. The computer programs being referred are MICROFEAP-II (P1 Module) and RISA-2D (R) Version ... -
A comparative study on cost of construction of different types of footings in Iloilo City
(2003)This study compared the cost of construction of different types of footings in Iloilo City. This further examined the cost implication of depth of excavation to attain the desired soil bearing capacity used in the design ... -
Computer aided design using IntelliCAD BricsCAD: A step by step module
(2006)1.1 What Is Computer Aided Design? Computer Aided Design (CAD) is the use of a wide range of computer-based tools that assist engineers, architects and other design professionals in their design activities. Current CAD ... -
Computer programs that can be used in foundation design
(2001)In the mid 1950’s major changes began to occur in engineering and science with the introduction of digital computers. It was also during this time when computer became easily accessible to engineers outside of a laboratory ... -
Computer-aided design and analysis of reinforced concrete footings
(2007)The primary objective of this study was to develop a software application in the field of Civil Engineering. The software is entitled “Computer-Aided Design and Analysis of Reinforced Concrete Footings”. The software is ... -
Construction industry in Boracay Island: Ordinances, practices, problems and issues
(2007)To examine the construction business in Boracay Island in terms of Local Ordinances if they conform to the National Building Code (NBC) and National Structural Code of the Philippines (NSCP), the documents containing local ... -
Construction of an alternative earthquake monitoring system
(2009)An earthquake is natural phenomena characterized by a strong sudden movement of the ground caused by stress in the tectonics plates. Geologists study these ground movements carefully using sophisticated equipment such as ... -
Design aids in structural concrete
(2004)Structural concrete design aids became a fact with the overwhelming use of computers and structural analysis and design programs. This will help the user to have an easier task to compute all the calculations to be done ... -
Design of rock support for underground mining using the rock mass index
(2002)This special paper presents the basic procedures in the design of underground rock support using the newly developed rock mass classification, the Rock Mass Index (RMi) method. The Rock Mass index is based on the defined ... -
Determination of physical and mechanical properties of aggregates for concrete design mixes in Negros Occidental
(2015)This research is intended to show a profile of the physical and mechanical properties of fine and coarse aggregates used in concrete design mixes for building construction in Negros Occidental. It addresses the lack of ... -
Development of computer program for the design of spread footing, axially loaded square column, and simply supported singly-reinforced concrete beam
(2001)The special project shall develop a program that would design commonly used reinforced concrete structures such as simple beam, column and isolated foundation footings. The language of programming to be used shall be Visual ... -
Economic viability of bagasse and rice hull as composite material for panelboard production
(1996)INTRODUCTION Philippines today presses towards continuing progress as evident in the government's master plan of industrialization and better life for the Filipinos. One major thrust of the government is the Medium term ... -
A guidebook for consultants, inspectors and contractors
(1997)A special problem paper presented on three problems in pre-construction and construction stages of building technology. These issues include difficulty in processing of building and occupancy permits, complications in ... -
Laboratory manual development for construction materials and testing, 2nd edition
(2005)Background Experimentation and testing plays an important role in the developing new materials and devices and in controlling the quality of materials for use in design and construction. In the educational process they ... -
Mindanao State University - General Santos drainage system
(2001)Structure is built with a specific purpose. So, it is paramount that a study or design should be made prior to the construction. The ultimate objective of design is to provide, in precise, concise, easy to comprehend form, ...
