Показать сокращенную информацию

dc.contributor.adviserAlguidano, Ramon A. Jr.
dc.contributor.authorNava, Babylou G.
dc.date.accessioned2021-06-02T08:01:59Z
dc.date.available2021-06-02T08:01:59Z
dc.date.issued2010
dc.identifier.citationNava, B. G. (2010). Design, construction and testing of a low-powered FM transmitter training module for the Electronics and Communications Engineering laboratory (Unpublished Master's special paper). Central Philippine University, Jaro, Iloilo City.en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12852/970
dc.descriptionAbstract onlyen_US
dc.description.abstractThis study aimed to impart further understanding of students and individuals by enhancing their skills in application of the basic principle and operation of Frequency Modulation (FM) with the actual set-up of the FM transmitter system. The training module is comprised of five building blocks: the power supply, the FM modulator, RF Amplifier, SWR meter and the antenna/dummy load assembled in a panel box or module with terminal connectors for easy installation and experimentation. Each component block meets the following requirements: power supply output voltage of28 VDC and 15 VDC; the FM modulator circuit output frequency set to 104.5 MHz; the transmitter unit with maximum power of20-W and an SWR reading at 1.0 to 1.5. The components were evaluated and gave the following results: power supply is working normally with an output voltage that ranges from 30.5 VDC and 15.2 VDC, FM modulator circuit providing an output frequency of 104.5 MHz with the FM transmitter unit providing an output power of 18.2 W and SWR reading of 1.3. It can be concluded that all components and features of the trainer were tested and gave satisfactory results purposely to be used in the Electronics and Communications Engineering Laboratoryen_US
dc.format.extenti, 50 leavesen_US
dc.language.isoenen_US
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Philippines*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/ph/*
dc.subject.ddcGSL Theses 620.0072 N227en_US
dc.subject.lcshRadio--Transmitters and transmissionen_US
dc.subject.lcshFM broadcastingen_US
dc.subject.lcshRadio frequency modulationen_US
dc.subject.lcshElectrical engineering--Study and teaching (Higher)en_US
dc.subject.lcshEngineering laboratoriesen_US
dc.subject.lcshEngineering laboratories--Equipment and suppliesen_US
dc.subject.lcshRadio frequency modulation--Transmitters and transmissionen_US
dc.subject.lcshRadio frequency modulation--Transmitters and transmission--Design and constructionen_US
dc.subject.lcshRadio frequency modulation--Transmitters and transmission--Testingen_US
dc.titleDesign, construction and testing of a low-powered FM transmitter training module for the Electronics and Communications Engineering laboratoryen_US
dc.typeSpecial paperen_US
dc.description.bibliographicalreferencesIncludes bibliographical referencesen_US
dc.contributor.chairMolina, Dany C.
dc.contributor.committeememberCalibjo, Cirilo C.
dc.contributor.departmentCollege of engineeringen_US
dc.description.degreeMaster of Engineeringen_US
local.subjectTransmitters--Design and constructionen_US
local.subjectTransmitters--Testingen_US
local.subjectCentral Philippine University (CPU). College of Engineering.en_US


Файлы в этом документе

Thumbnail
Thumbnail

Данный элемент включен в следующие коллекции

Показать сокращенную информацию

Attribution-NonCommercial-NoDerivs 3.0 Philippines
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 3.0 Philippines