Design, construction and testing of a low-powered FM transmitter training module for the Electronics and Communications Engineering laboratory
摘要
This study aimed to impart further understanding of students and individuals by enhancing their skills in application of the basic principle and operation of Frequency Modulation (FM) with the actual set-up of the FM transmitter system. The training module is comprised of five building blocks: the power supply, the FM modulator, RF Amplifier, SWR meter and the antenna/dummy load assembled in a panel box or module with terminal connectors for easy installation and experimentation. Each component block meets the following requirements: power supply output voltage of28 VDC and 15 VDC; the FM modulator circuit output frequency set to 104.5 MHz; the transmitter unit with maximum power of20-W and an SWR reading at 1.0 to 1.5. The components were evaluated and gave the following results: power supply is working normally with an output voltage that ranges from 30.5 VDC and 15.2 VDC, FM modulator circuit providing an output frequency of 104.5 MHz with the FM transmitter unit providing an output power of 18.2 W and SWR reading of 1.3. It can be concluded that all components and features of the trainer were tested and gave satisfactory results purposely to be used in the Electronics and Communications Engineering Laboratory
描述
Abstract only
建议引文
Nava, B. G. (2010). Design, construction and testing of a low-powered FM transmitter training module for the Electronics and Communications Engineering laboratory (Unpublished Master's special paper). Central Philippine University, Jaro, Iloilo City.
文件类型
Special paper主题
Radio--Transmitters and transmission
; FM broadcasting
; Radio frequency modulation
; Electrical engineering--Study and teaching (Higher)
; Engineering laboratories
; Engineering laboratories--Equipment and supplies
; Radio frequency modulation--Transmitters and transmission
; Radio frequency modulation--Transmitters and transmission--Design and construction
; Radio frequency modulation--Transmitters and transmission--Testing
关键字
部
College of engineering学位
Master of Engineering货架位置
GSL Theses 620.0072 N227
物理描述
i, 50 leaves
The following license files are associated with this item:
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 3.0 Philippines
相關項目
顯示由標題,作者,創造者和主題相關的項目。
-
Design, development, and construction of solar photovoltaic (PV) system training module (SPVSTM)
Alguidano, Ramon A. Jr.; Rubidy, Rex S.; Manajero, Reylin D. (Central Philippine University, 2010-06)This study aimed to design, develop, and construct a locally-made Solar PV System Training Module (SPVSTM) for educational use specifically on subjects related to alternative and renewable energy. This training module is ... -
Inflicting or not? The level of effectiveness of product placements in affecting the credibility of news programs as perceived by radio listeners of Maasin, Iloilo
Chan, Jonas Raphael M. (2018-04)This study aimed to determine the level of effectiveness as to how product placements affects the credibility of news programs through the perception of AM Radio listeners of the municipality of Maasin in the province of ... -
Significance of radio as a source of information and entertainment to education students of Central Philippine University
Fortit, Ryle Star V. (2019-03)The study was conducted to determine the significance of radio as a source of information and entertainment among the 3rd year and 4th year education students of Central Philippine University. Among 100 prospective ...