Afficher la notice abrégée

dc.contributor.authorJava, Alberto A.
dc.contributor.authorAlguidano, Ramon A. Jr.
dc.contributor.authorAcanto, Caesar Rico S.
dc.contributor.authorArmadillo, Ruben M.
dc.contributor.authorIdemne, Vitini Edhard O.
dc.date.accessioned2020-12-29T06:06:08Z
dc.date.available2020-12-29T06:06:08Z
dc.date.issued2012-6
dc.identifier.citationJava, A. A., Alguidano, R. A., Jr., Acanto, C. R. S., Armadillo, R. M., & Idemne, V. E. O. (2012). Design and development of automatic battery charger with controller for battery charging station. Patubas, 7(1), 77-87.en_US
dc.identifier.issn1908-515X
dc.identifier.urihttps://hdl.handle.net/20.500.12852/56
dc.description.abstractThe study aimed to design and construct a locally-made battery charge controller for the Battery Charging Station (BCS) project implemented by Central Philippine University-Affiliated Non-conventional Energy Center (CPU-ANEC). The battery charge controller was designed only to protect the battery from over-charging. The functionality of the charge-controller was tested using a solar panel and a battery. The charging current was controlled by the PWM circuit. During charging, the output of the PWM circuit was both set approximately to ten percent (10%) duty cycle for charging ninety percent (90%) duty cycle for trickle charging. The output waveform and the duty cycle of the PWM circuit were checked using the oscilloscope. Testing of the charge-controller was done for four days of continuous operation to ensure the reliability of the system. Based on the test results, when the duty cycle was ten percent (10%), the green LED lighted-up and the ammeter indicated maximum charging current, while for the ninety percent (90%) duty cycle, a yellow LED light-up indicating minimum current. The red LED light-up when the polarity of the battery was reversed, while the orange LED lightedup only when the battery state of charge was empty. These test results show that the battery charge-controller worked as expected by meeting the required design parameters. The unit is now ready for use.en_US
dc.language.isoenen_US
dc.publisherCentral Philippine Universityen_US
dc.subject.lcshBattery chargers--Design and constructionen_US
dc.subject.lcshElectric current regulatorsen_US
dc.subject.lcshBattery chargersen
dc.titleDesign and development of automatic battery charger with controller for battery charging stationen_US
dc.typeArticleen_US
dc.citation.firstpage77en_US
dc.citation.lastpage87en_US
dc.citation.journaltitlePatubas
dc.citation.volume7en_US
dc.citation.issue1en_US
local.relation.associatedcontenthttps://repository.cpu.edu.ph/handle/20.500.12852/890 Research reporten


Fichier(s) constituant ce document

Thumbnail

Ce document figure dans la(les) collection(s) suivante(s)

  • Patubas [109]
    Patubas is a refereed research journal of Central Philippine University.

Afficher la notice abrégée