Design, construction and performance evaluation of a portable shredder with vermicomposting bin
![Thumbnail](/bitstream/handle/20.500.12852/463/SGS_MAE_BallanoSC_2014_Ab.pdf.jpg?sequence=4&isAllowed=y)
Page views
455Date
2014Auteur
Thesis Adviser
Defense Panel Chair
Share
Metadata
Afficher la notice complète
Résumé
This portable shredder with vermicomposting bin was designed at the College of Engineering, Central Philippine University, Iloilo City. The machine is constructed using mainly stainless steel sheet, flat bars and angle bars and driven by a 1.5 Hp electric motor using the belt and pulley transmission. The first component is the shredder which consists of six parts, namely: frame, inlet hopper, shredding cylinder, shafting and blade, belt and pulley, and discharge hopper. The second component is the vermicomposting bin, which is mounted at the shredder. It consists ofthe bin cover, fermenting and vermicomposting chambers, and an air dryer.
The machine produced a throughput capacity of49-73 kg/hr of biodegradable wastes reducing its volume after shredding to 65-73% in one pass operation.
The device can be fabricated at a cost of Php20,121.75 including labor. It consumed about 16 to 24 watts of energy for every kilogram ofwaste shredded. The vermibin obtained a throughput capacity of 202.5 kg ofshredded substrates per load with a composting rate of 160 kg of vermicompost per month giving a recovery rate of 79%. The return ofinvestment (ROI) using this technology is 71.56%.
Description
Abstract only
Suggested Citation
Ballano, S. C., Jr. (2014). Design, construction and performance evaluation of a portable shredder with vermicomposting bin (Unpublished Master's special paper). Central Philippine University, Jaro, Iloilo City.
Type
Special paperSujet
Department
School of Graduate StudiesDegree
Master of EngineeringShelf Location
GSL Theses 620.0072 B211
Physical Description
viii, 41 leaves: color illustrations