Faculty Researches: Recent submissions
Ipinapakita ngayon ang mga item 21 - 38 ng 38
-
Constitutive model for three-dimensional behavior of anisotropic soils
(Central Philippine University, 2003-07)This was conducted to study the theory of “Multi-Directional Sliding Model” and verify its application with some series of element tests available for the stress condition with principal stress axis. Specifically, it aimed ... -
Design and development of electronics workbench (CPUBENCH) for EE/ECE laboratory
(Central Philippine University, 2008-09)The Electronic workbench (CPUBENCH) for EE/ECE Laboratory was designed based on the basic requirements for the electronics laboratory. This workbench is used when performing the laboratory experiments in electronics, basic ... -
Design and development of automatic battery charger with controller for battery charging station
(Central Philippine University, 2008-04)The study aimed to design, develop, and constructs a locally-made battery charge controller for Battery Charging Station (BCS) project implemented by Central Philippine University-Affiliated Non-conventional Energy Center ... -
Requirements management tool for small-to-medium scale software projects
(Central Philippine University, 2007-06)Software requirements consist of product and behavioral properties of the software system. It is an essential factor in building the right software product for clients and customers. Communication is very important during ... -
Design, development, and construction of Charge Controller (CC) and Solar Home System (SHS)
(Central Philippine University, 2009-11)The study aimed to design, develop, and construct a Charge Controller (CC) and Solar Home System (SHS) with locally made and available component. The system design consists of six components: the Photovoltaic (PV) module, ... -
3R kit - Analog circuit trainer
(Central Philippine University, 2005-08)The 3R Kit-Analog Circuit Trainer was designed based on the requirement in basic electrical circuit experiment in the Physics Laboratory. It is a low-cost circuit trainer that is locally made and the component are locally ... -
Development of a process asset library for software engineering projects
(Central Philippine University, 2006-08)In software development, managing project artifacts is one of the best practices of software engineering in order to keep track project activities, provide evidences of software processes, easy adaptation to changing ... -
Assessment of rainwater harvesting potential of selected buildings in CPU campus
(2004-08)Assessment of rainwater harvesting potential of selected buildings in Central Philippine University (CPU) aims to assess the said buildings for rainwater collection and utilization. Specific areas of concerns are type of ... -
Level of harmonics produced by the variable frequency drive controller used in the induction type water pump motor of Central Philippine University
(2014-11)The determination of the level of harmonics produced by the variable frequency drive (VFD) controller used to control the induction-type water pump motor at the water pumping station of Central Philippine University (CPU) ... -
Design of drinking water treatment facility system in Central Philippine University
(Central Philippine University, 2016-12)This project study presents an innovative way of constructing a drinking water treatment facility system within Central Philippine University. It starts with the preparation of a preliminary process flow that can treat raw ... -
Design, construction and testing of a low cost mini electric steam generator
(Central Philippine University, 2010-02)This study aimed to design, construct and test a Low Cost Mini Electric Steam Generator for Physics Laboratory with the following components: the AC power supply, heater, boiler, water pump, water level controller, temperature ... -
Requirement-management tool for small to medium-scale software projects
(Central Philippine University, 2008-10)Software requirements consist of the product and behavioral properties of a software system. They are essential factors in building the right software product/s for clients and customers. Communication is very important ... -
Constitutive model for three-dimensional behavior of anisotropic soils
(Central Philippine University, 2005-06)This study is based on the concept that the deformation strength characteristic of cohesionless soils is significantly influenced by the rotation of principal stress axes. Inherent anisotropy on the mechanical properties ... -
Robocar: Design implementation and testing of a robot car
(Central Philippine University, 2005-06)This study was conducted to design, construct and test the performance of a Robot Car. Specifically, the study aimed to develop a working prototype of a microcontroller driven LEGO car; develop step-by-step instructions ... -
Monitoring the water quality of domestic and drinking water from different water sources in CPU campus
(Central Philippine University, 2004-10)This study determined the quality of domestic and drinking water from different water sources in CPU. This study described the quality of water from the identified thirteen water sources inside CPU campus, nine of which ... -
Design and development of electronics workbench (CPUBENCH) for EE/ECE laboratory
(Central Philippine University, 2011-12)The Electronic workbench (CPUBENCH) for EE/ECE Laboratory was designed based on the basic requirements for the electronics laboratory. This workbench is used when performing the laboratory experiments in electronics, basic ... -
Determination of the compressive strength of concrete from one to twenty-eight days
(Central Philippine University, 2003-09)This study was conducted primarily to determine the daily compressive strength of concrete for twenty-eight days. The specific objectives of the study were to prepare three sets of samples consisting of twenty-eight concrete ... -
Level of harmonics produced by variable frequency drive controller used in induction type water pump motor
(Central Philippine University, 2018-09-01)This study focuses specifically on the determination of electrical noise or harmonic level generated by the variable frequency drive controller in terms of its amplitude and frequency. The central area of concern is the ...
