Bachelor of Science in Electronics Engineering

 

Recent Submissions

  • Hover over the signal: Emergency wi-fi signal transmitter and repeater with messaging application 

    Ballon, Cyrus S.; Lampitco, Joss Rey G.; Pelaez, CJ Christian L. (Central Philippine University, 2022-06)
    The focus of this research was to design, construct, and test an emergency Wi-Fi signal transmitter and repeater with a messaging app. Two NodeMCU Microcontrollers with ESP8266 Wi-Fi modules and two drones make up the ...

  • Design of automated farmbot: An automatic watering with monitoring system and seed sowing device using printing mechanism to cultivate agricultural seeds 

    Armada, Leovileen A.; Espino, Mary Ferlyn S.; Oren, Lou Jason S.; Salditos, Queenie M. (Central Philippine University, 2023-06)
    The rapid urbanization, increasing frequency of natural disasters, and rising sea level have significantly impacted the agricultural sector, resulting in reduced crop yields and food scarcity. This study aimed to investigate ...

  • Optimization of hydroponics system into an automated IoT-Driven greenhouse facility in Pavia, Iloilo 

    Cordero, John Lloyd B.; Genovaña, Stephanie Nicole C.; Libar, Ira Joy D.; Noble, Jian Martin R.; Segovia, Theo Louis E.; Silla, Marco T.; Taton, Scheria Mae P. (Central Philippine University, 2025-05)
    This study focused on optimizing the existing ARUGA Hydroponics System in Pavia, Iloilo, by developing it into an IoT-powered automated greenhouse facility designed to overcome the limitations of traditional manual hydroponic ...

  • ALIBS: Automated laboratory inventory and borrowing system using RFID technology for the CPU ECE laboratories 

    Biso, Fredric Mitch P.; Casandra, JC Niel S.; Cillo, Harold Niño A.; Estrella, Jay Kim B.; Guillen, Khilrain Royce H.; Habaradas, Karl Adrian G.; Labatorio, Alexander C.; Porras, Famille Bianca P. (Central Philippine University, 2025-05)
    The Central Philippine University Electronics Engineering (CPU ECE) laboratories performs the inventory and allows the borrowing of laboratory assets. However, the traditional method of performing these tasks is still being ...

  • Smart packaging system: Dairy supply chain traceability enhancement with industry 4.0 

    Cocjin, Jeff Pablo O.; Lopera, Louise Angelo R.; Gallardo, Adrian Janrho E.; Quillanora, Lance I.; Permalan, Jade Rayden S.; Señeres, Klievont S.; Saydokes, Lanz Lawrenz D.; Decena, Marie Claire R. (Central Philippine University, 2025-05)
    Supply chains are important in transporting goods, services and information across countries. However, these supply chains are prone to problems and disruptions because of their high interdependency. This research aimed ...

  • ARUGA aquaponics system: Design, construct, and test of automated media bed aquaponics system for ARUGA small-scale aquaculture production 

    Corcino, Kaila Mae F.; Dulos, Nathaniel T.; Guardamano, Princess Em E.; Goto, Vincy Brayne D.; Llamelo, Alfred Justin E.; Salvilla, Rylle Christian D.; Tan, Ramon Carlos J. (Central Philippine University, 2025-05)
    This study presents the design, construction, and performance evaluation of an automated media bed aquaponics system designed for ARUGA, a small-scale aquaculture production program in Iloilo, Philippines. ARUGA, an ...

  • Smart aqua-farm system 

    Cahuya, Actorani B. II; Castañeda, Jonas Joseph S.; Nuñal, Jether Jede T.; Pañoso, Neil Van Joseph J.; Tio, Danielle Arriz T. (Central Philippine University, 2020-04)
    Maintaining water quality is vital as it is the most important factor in determining the success and failure of an aquaculture farming. An unbalanced ecosystem can greatly increase some mortality rate of fish, mollusk, and ...

  • Fish attracting device 

    Mondejar, Kurt Russel; Naviamos, Alexis Ryan; Solis, Sim Marlou; Tamson, Ma. Reena Samantha; Tupaz, John Michael (Central Philippine University, 2020-04)
    Fishing is important to the Philippine industry. The people of the country are highly dependent in this livelihood. According to the statistics, there are about 1.6 million Filipinos who are part of the country’s fishing ...

  • Life beneath the waters: Design, construction, and testing of a remotely operated underwater vehicle for visual monitoring and health identification of corals 

    Dela Cruz, Mark Joshua P.; Momblan, Antteo Jian D.; Ollisa, Jonila B. (Central Philippine University, 2022-06)
    This study aimed to design, construct, and test an Underwater Remotely Operated Vehicle (ROV) for visual monitoring and heath identification of corals. The purpose of this study was to give researchers an opportunity to ...

  • Wind tunnel state monitoring system with external terminal control for Central Philippine University 

    Chong, Anne Kristine A.; Macabebe, Princess Je L.; Quimpo, Jose Cristituto P.; Roquero, Dan Joven R. (Central Philippine University, 2023-06)
    The Philippines has been hit by destructive typhoons in recent years, prompting the Department of Science and Technology to establish a wind tunnel facility to test the resiliency of structures to varying wind speeds. ...

  • Automatic solar-powered water filtration system with ultraviolet sterilization for a community well at Zone 13, Calaparan, Arevalo, Iloilo City 

    Forbes, Axcel; Genovate, Paul Anthony; Manero, Raymond; Matchan, Dave Tristan (Central Philippine University, 2023-06)
    To prevent food and water-borne diseases from happening, an Automatic Solar-Powered Water Filtration System was implemented as one of the best solutions. The study area is in a communal deep-well found in Zone 1 3 Brgy. ...

  • Hybrid solar-wind powered street lights 

    Aduna, Vincent Ray J.; Banaay, Kenneth L.; Tarroja, Gerry Laurent U.; Tumulak, Klea A.; Valenzuela, Nellyn Joy C. (Central Philippine University, 2020-04)
    This research aimed to plan, construct, and test a Hybrid Solar-Wind Powered Street Light, a prototype system, for Dumangas- Barotac Road. Since Dumangas-Barotac Road holds multiple records vehicular accidents at night ...

  • MEDIVEND: Over-the-counter vending machine 

    Esteba, Joshua Kyle P.; Isidro, Elson D.; Jalyone, Brian Kent J.; Ledesma, Hector Jaime A.; Lopez, Third Ed D. (Central Philippine University, 2020-04)
    This study aims to develop an efficient method of dispensing over-the-counter medicine through the fabrication of a medicine vending machine. The machine has four major components: the user interface, the dispensing ...

  • Radio Frequency Identification (RFID) based smart power access system for electronics laboratory 

    Aguacito, John D.; Defensor, Vincent Salvador P.; Javil, Exel Jan B.; Llose, Gladys Hope I.; Siroy, Reis Titus Levy P.; Sobretodo, Vince Andy D. (Central Philippine University, 2020-03)
    This study sought to modernize the manual switching of electricity and to prevent the unnecessary electrical consumption that happens inside the Electronics laboratory using Radio Frequency Identification (RFID) - Based ...