Design, fabrication, and performance evaluation of a cassava digger attached to a tractor prime mover
![Thumbnail](/bitstream/handle/20.500.12852/1190/CARES_BSAgrEng_TaladhayME_2020_Ab_Sub.pdf.jpg?sequence=5&isAllowed=y)
Page views
1,058Petsa
2020May-akda
Tagapayo ng Tesis
Tagapangulo ng Panel ng Depensa
Miyembro ng Defense Panel
Magbahagi
Metadata
Ipakita ang buong tala ng item
Abstract
The study was conducted to design and evaluate the field test performance of the designed cassava digger attached to a tractor prime mover in harvesting cassava tuberous roots. The fabrication was done at a machine shop located in Jaro, Iloilo City from April 2019 to May 2019. Performance evaluation was done at Sitio Salong, Calaya Nueva Valencia, Guimaras in October 17, 2019. The implement has the components of: (a) frame, (b) standard, (c) soil breaker, (d) soil guide, (e) digger base plate, (f) digging blade and (g) implement stand. The machine has an overall dimension of 115 cm length, 84 cm width and 90 cm height. The minimum power requirement to pull the implement is 70 Hp depending on the soil resistance. Results of the actual field test performance showed that the field efficiency and the digging efficiency of the machine were 69% and 96%, respectively. It can dig up to 30 cm depth. It has an investment cost of PHP50,000.00. The fixed cost and variable cost per day at 8 hours operation were PHP408.33 and PHP7,600.00, respectively, giving a total cost of PHP8,008.33. Finally, the operating cost per hectare of cassava tubers was PHP4,766.86, which was computed by dividing the total cost by its actual field capacity of 1.68 hectares per day at 8 hours operation. On the other hand, using the manual method showed that the total harvesting cost is PHP9,000.00 per hectare. Comparing the operating cost of the manual method to that of mechanized method of harvesting, not less than PHP4,000.00 per hectare will be saved by a farmer if he will adopt a mechanized operation.
Paglalarawan
Abstract only
Mungkahing Sipi
Taladhay, M. E. (2020). Design, fabrication, and performance evaluation of a cassava digger attached to a tractor prime mover (Unpublished Thesis). Central Philippine University, Jaro, Iloilo City.
Uri
ThesisMga Paksa
Mga keyword
Kagawaran
College of Agriculture, Resources and Environmental SciencesDegree
Bachelor of Science in Agricultural EngineeringLokasyon ng Istante
Filipiniana Theses 630.72 T141
Pisikal na paglalarawan
ix, 40 leaves
Collections
Ang mga sumusunod na mga file ng lisensya ay naiugnay sa item na ito:
Maliban kung sa kabilang banda ay nabanggit, ang lisensya ng item na ito ay inilarawan bilangAttribution-NonCommercial-NoDerivs 3.0 Philippines
Mga parehong item
Ipinapakita ang mga item na nauugnay sa pamagat, may-akda, tagalikha at paksa.
-
Assessment of rainwater harvesting potential of selected buildings in CPU campus
Ojario, Felix A. (2004-08)Assessment of rainwater harvesting potential of selected buildings in Central Philippine University (CPU) aims to assess the said buildings for rainwater collection and utilization. Specific areas of concerns are type of ... -
Palay: From the paddy to the plate
Sonza, Demy P. (Center for West Visayan Studies, 1994)<em>Palay</em> or rice (<em>Oryza sativa</em>) has been the staple food crop of the Philippines for centuries. As far as historical records show, Iloilo has been one of the leading provinces in the production of palay. ... -
Biomass yield of Moringa oleifera as influenced by plant density and harvest frequency
Patricio, Hope G.; Palada, Manuel C.; Deloso, Homer E.; Garcia, D. E. (International Society for Horticultural Science, 2017-05-09)This study was conducted to determine the leaf biomass of moringa as influenced by plant density and frequency of pruning. Moringa plants were grown at four plant spacings and densities: a) 1×1 m (10,000 plants ha<sup>-1</sup> ...