Afficher la notice abrégée

dc.contributor.adviserRomallosa, Aries Roda D.
dc.contributor.authorSombiro, Mae Joy A.
dc.date.accessioned2021-07-14T08:19:42Z
dc.date.available2021-07-14T08:19:42Z
dc.date.issued2019
dc.identifier.citationSombiro, M. J. A. (2019). Design, fabrication and evaluation of hydraulic diaphragm pump (Unpublished Special paper). Central Philippine University, Jaro, Iloilo City.en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12852/1189
dc.descriptionAbstract onlyen_US
dc.description.abstractThe study was conducted to design, fabricate and evaluate the performance of the hydraulic diaphragm pump for irrigating water. The fabrication was done in Molo, Iloilo City and the performance testing and evaluation were conducted at the Jalaur Dam located in Brgy. Moroboro, Dingle, Iloilo. The set-up consisted of the site of the source of water (dam), drive pipe, impulse valve, diaphragm body and pump end. The diaphragm body was composed of rubber diaphragm, spring, rod and gasket cup. The pump end was composed of suction valve, suction pipe, delivery valve and delivery pipe. The operation of the hydraulic diaphragm pump started when the water flowed to the drive pipe creating a water hammer effect causing the impulse valve to open or close. When the impulse valve closes, pressure is directed to the diaphragm which caused the plunger to force water to the delivery pipe. Results revealed that for a maximum vertical lift of 6 m, an average discharge flow rate of 0.054 Ips (194.4 li/hr) was recorded giving the pump a power generation of 3.167 watts. The investment cost is PHP25,000.00 for the fixed and variable costs of PHP45.89/day and PHP200.00/day, respectively, giving a total cost of PHP245.89/day. Furthermore, computations revealed that the hydraulic diaphragm pump may incur an operating cost of PHP0. 16/li.en_US
dc.format.extentviii, 24 leavesen_US
dc.language.isoenen_US
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Philippines*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/ph/*
dc.subject.ddcFilipiniana Theses 630.72 So52en_US
dc.subject.lcshWater-supplyen_US
dc.subject.lcshIrrigation pumpsen_US
dc.subject.lcshIrrigation pumps--Design and constructionen_US
dc.subject.lcshPumping machineryen_US
dc.subject.lcshPumping machinery--Design and constructionen_US
dc.subject.lcshPumping machinery--Evaluationen_US
dc.subject.lcshIrrigation pumps--Evaluationen_US
dc.subject.lcshAgriculture--Water-supplyen_US
dc.subject.lcshIrrigation pumps--Testingen_US
dc.titleDesign, fabrication and evaluation of hydraulic diaphragm pumpen_US
dc.typeSpecial paperen_US
dc.description.bibliographicalreferencesIncludes bibliographical referencesen_US
dc.contributor.chairCabarles, Jaime Jr
dc.contributor.committeememberPatricio, Hope G.
dc.contributor.departmentCollege of Agriculture, Resources and Environmental Sciencesen_US
dc.description.degreeBachelor of Science in Agricultural Engineeringen_US


Fichier(s) constituant ce document

Thumbnail
Thumbnail

Ce document figure dans la(les) collection(s) suivante(s)

Afficher la notice abrégée

Attribution-NonCommercial-NoDerivs 3.0 Philippines
Excepté là où spécifié autrement, la license de ce document est décrite en tant que Attribution-NonCommercial-NoDerivs 3.0 Philippines