Durability of hollow blocks with shredded plastics as additive
![Thumbnail](/bitstream/handle/20.500.12852/1149/CARES_BSEM_ParedesJC_2020_Ab_Sub.pdf.jpg?sequence=5&isAllowed=y)
Page views
17,365Date
2020Auteur
Thesis Adviser
Defense Panel Chair
Defense Panel Member
Share
Metadata
Afficher la notice complète
Résumé
This study was conducted to produce and determine the durability of hollow blocks with shredded plastics as additive. The study conducted utilized shredded plastics, specifically Low-Density Polyethylene (LDPE) as additives in making concrete tile hollow blocks. The plastics were divided into those which were shredded finely and those that were shredded into strips. Three varying amounts of shredded plastics were tested for each type, as 200 g, 400 g and 600 g. Results of the study revealed that concrete hollow blocks made of Cement + sand + gravel + 200 g of Low-Density Polyethylene (LDPE) plastics shredded into strips has the highest compressive strength while cement + sand + gravel + 600 g of Low-Density Polyethylene (LDPE) shredded finely has the lowest compressive strength. All concrete hollow blocks were rough. The concrete blocks made of cement +sand +gravel was regarded as the most aesthetically pleasing. The concrete blocks made of cement + sand + gravel + Low-Density Polyethylene (LDPE) shredded finely (600g) was the lightest. Plastics shredded into strips at 200g as additive produced the most durable hollow block and can be a viable additive to increase the durability of hollow blocks.
Description
Abstract only
Suggested Citation
Paredes, J. C. (2020). Durability of hollow blocks with shredded plastics as additive (Unpublished Special paper). Central Philippine University, Jaro, Iloilo City.
Type
Special paperSujet
Department
College of Agriculture, Resources and Environmental SciencesDegree
Bachelor of Science in Environmental ManagementShelf Location
Filipiniana Theses G 320 .P5 .P374 2020
Physical Description
viii, 33 leaves