Search
Now showing items 1-10 of 38
The effect of rewiring the electrical power distribution system on the output voltages and maintenance at Central Philippine University
(2007)
This study aimed to assess the effects of rewiring the Electrical Power Distribution System on output voltages and maintenance of electrical devices at CPU campus. Specifically it determined and compared the output voltages ...
Design and development of automatic battery charger with controller for battery charging station
(Central Philippine University, 2008-04)
The study aimed to design, develop, and constructs a locally-made battery charge controller for Battery Charging Station (BCS) project implemented by Central Philippine University-Affiliated Non-conventional Energy Center ...
Shredded post-consumer polyethylene terephthalate (PET): An alternative reinforcement for clay soils
(2014)
Clay is one of the most abundant components of the earth’s surface. It exhibits considerable strength when air-dried. When wet, the presence of water may increase resistance by improving cohesion; however, the water also ...
A guidebook for consultants, inspectors and contractors
(1997)
A special problem paper presented on three problems in pre-construction and construction stages of building technology. These issues include difficulty in processing of building and occupancy permits, complications in ...
Robocar: Design implementation and testing of a robot car
(Central Philippine University, 2005-06)
This study was conducted to design, construct and test the performance of a Robot Car. Specifically, the study aimed to develop a working prototype of a microcontroller driven LEGO car; develop step-by-step instructions ...
Design, construction and testing of a low-powered FM transmitter training module for the Electronics and Communications Engineering laboratory
(2010)
This study aimed to impart further understanding of students and individuals by enhancing their skills in application of the basic principle and operation of Frequency Modulation (FM) with the actual set-up of the FM ...
Assessment of rainwater harvesting potential of selected buildings in CPU campus
(2004-08)
Assessment of rainwater harvesting potential of selected buildings in Central Philippine University (CPU) aims to assess the said buildings for rainwater collection and utilization. Specific areas of concerns are type of ...
Design and development of electronics workbench (CPUBENCH) for EE/ECE laboratory
(Central Philippine University, 2011-12)
The Electronic workbench (CPUBENCH) for EE/ECE Laboratory was designed based on the basic requirements for the electronics laboratory. This workbench is used when performing the laboratory experiments in electronics, basic ...
Determination of the compressive strength of concrete from one to twenty-eight days
(Central Philippine University, 2003-09)
This study was conducted primarily to determine the daily compressive strength of concrete for twenty-eight days. The specific objectives of the study were to prepare three sets of samples consisting of twenty-eight concrete ...
Design, development, and construction of Charge Controller (CC) and Solar Home System (SHS)
(Central Philippine University, 2009-11)
The study aimed to design, develop, and construct a Charge Controller (CC) and Solar Home System (SHS) with locally made and available component. The system design consists of six components: the Photovoltaic (PV) module, ...